radar雷竞技-雷竞技·(中国)APP官网

产品优势：

PT100-T1 温度传感器

型号：PT100-T1温度传感器
采用进口PT100铂电阻/J、K、E型热电偶温度芯体；
选进的贴片工艺，具有零点、满量程、温度补偿；
精度等级：B级、A级、1/3B级可选；
产品响应快速，反应灵敏，精度高；
结构多样化：螺纹活套式安装，产品安装方向可调；
气连接IP65/68，二线/三芯/四芯屏蔽温度补偿线；
304/316/刚玉管/合金等制定材料外壳；
温度范围：-50℃ ～0～100℃～500℃；
探杆长度/直径/螺纹规格可制定；
可替代国外同类型高压产品；

PT100-T1温度传感器
主要应用：
环境温度/大棚温度监控；
设备温度监控；
自动化/农业/化工/电力/气象等领域的温度测量与控制

Model: PT100-T1 temperature sensor

Imported PT100 platinum resistor / J, K and e thermocouple temperature core is adopted;
The selected patch process has zero point, full scale and temperature compensation;
Accuracy grade: Grade B, Grade A and grade 1 / 3b are optional;
The product has fast response, sensitive response and high precision;
Diversified structure: thread installation type, armored type, patch type, plug-in type, flange type, etc;
Air connection IP65 / 68, two wire / three core / four core shielded temperature compensation wire;
304 / 316 / corundum tube / alloy and other shell materials;
Temperature range: - 198 ℃ ~ - 40 ℃ ~ 0 ~ 100 ℃ ~ 500 ℃ ~ 1000 ℃;
Probe rod length / diameter / thread specification / flange size can be formulated;
It can replace foreign high-voltage products of the same type;

PT100-T1 temperature sensor Main applications:

Temperature measurement and monitoring of inner cavity of pipeline / equipment;
Equipment temperature monitoring;
Temperature measurement and control in automation / Agriculture / chemical industry / electric power / meteorology and other fields

应用领域：

智慧消防
蒸汽供给系统
冶金设备
石油化工

产品家族：

规格参数

PT100-T1温度传感器

主要技术参数
测量介质：液体、气体（与产品过程连接材料兼容）
压力形式：表压、绝压

量程：
-50℃～100℃/主要测量环境温度；
0℃～100℃～～500℃/PT100型测量高温介质温度；
0℃～500℃/热电偶型测量高温/超高温介质温度；

综合精度：
PT100类型：A级，B级，1/3B级
热电偶类型：Ⅰ级,Ⅱ级,Ⅲ级

输出信号:
PT100类型：电阻信号（参照分度表）
PT1000类型：电阻信号（参照分度表）
热电偶类型：mV电压信号（参照分度表）
绝缘阻抗：≥1000 MΩ/100VDC

介质温度：
-50℃～100℃/主要测量环境温度；
0℃～100℃～～500℃/PT100型测量高温介质温度；
0℃～500℃～1000℃/热电偶型测量高温/超高温介质温度；
环境温度：-40～70℃
稳定性：≤±0.5%FS/年
振动影响：≤±0.25%FS/年（机械振动频率20Hz～1000Hz）
耐压压力：通用小于10个大气压，特殊要求需定制
防护等级：IP65/IP68
连接材料：304/316L/刚玉等
过程连接：M20X1.5,G1/2,用户制订规格

Measuring medium: liquid and gas (compatible with product process connecting materials)

Pressure form: gauge pressure and absolute pressure

Range:
-50 ℃ ~ 100 ℃ / mainly measuring ambient temperature;
0 ℃ ~ 100 ℃ ~ 500 ℃ / PT100 type measures the temperature of high-temperature medium;
0 ℃ ~ 500 ℃ ~ 1000 ℃ / thermocouple type to measure the temperature of high temperature / ultra-high temperature medium;

Comprehensive accuracy:
PT100 type: Class A, class B, class 1 / 3B
Thermocouple type: class I, II and III

Output signal:
PT100 type: resistance signal (refer to the graduation table)
PT1000 type: resistance signal (refer to the graduation table)
Thermocouple type: MV voltage signal (refer to the graduation table)
Insulation impedance: ≥ 1000 m Ω / 100VDC

Medium temperature:
-50 ℃ ~ 100 ℃ / mainly measuring ambient temperature;
0 ℃ ~ 100 ℃ ~ 500 ℃ / PT100 type measures the temperature of high-temperature medium;
0 ℃ ~ 500 ℃ ~ 1000 ℃ / thermocouple type to measure the temperature of high temperature / ultra-high temperature medium;

Ambient temperature: - 40 ~ 70 ℃
Stability: ≤± 0.5% FS / year
Vibration influence: ≤± 0.25% FS / year (mechanical vibration frequency 20Hz ~ 1000Hz)
Withstand pressure: less than 10 atmospheres in general, customized for special requirements
Protection grade: IP65 / IP68
Connecting material: 304 / 316L / corundum, etc
Process connection: m20x1 5. G1 / 2, specifications formulated by users

订购注意事项

PT100-T1温度传感器产品订购注意事项

1、产品量程选择：
为了使产品精度、寿命、稳定性等功能达到最佳效果，产品的量程选择参照以下公式计算：
量程 = 系统最大温度 X （1.2-1.5）倍；
产品的实际测量压力范围，应该在量程范围的15%-80%；

2、产品输出/精度等级/采集方式：
不同产品规格，精度等级不一样：
PT100类型：A级，B级，1/3B级
热电偶类型：Ⅰ级,Ⅱ级,Ⅲ级
温度传感器的后端采集方式要与传感器的输出匹配
PT100类型：电阻信号，采集仪表或输入模块或板需要可采集PT100的电阻信号；
PT1000类型：电阻信号，采集仪表或输入模块或板需要可采集PT1000的电阻信号；
热电偶类型：mV电压信号，采集仪表或输入模块或板需要可采集热电偶的信号；

3、用户要了解产品的测量介质特性：
介质规格、介质温度、介质纯度（是否含有杂质或颗粒等）；

4、用户要了解产品的安装环境及安装方式：
室内或室外安装；
环境温度；
要求的密封等级；
设备的振动范围；
压力密封方式：锥度密封、端面密封、弧面密封、球面密封；
安装空间是否满足产品外形尺寸；

Precautions for ordering PT100-T1 temperature sensor

1. Product range selection:
In order to achieve the best effect of product accuracy, service life, stability and other functions, the range of the product is calculated according to the following formula:
Range = x (1.2-1.5) times the maximum temperature of the system;
The actual measuring pressure range of the product should be 15% - 80% of the measuring range;

2. Product output / accuracy level / acquisition method:
Different product specifications and accuracy levels:
PT100 type: Class A, class B, class 1 / 3B
Thermocouple type: class I, II and III
The back-end acquisition mode of the temperature sensor shall match the output of the sensor
PT100 type: resistance signal. The resistance signal of Pt100 can be collected as required by the acquisition instrument or input module or board;
PT1000 type: resistance signal. The resistance signal of PT1000 can be collected as required by the acquisition instrument or input module or board;
Thermocouple type: MV voltage signal. The signal of thermocouple can be collected as required by the acquisition instrument or input module or board;

3. Users need to understand the characteristics of the measuring medium of the product:
Medium specification, medium temperature, medium purity (whether it contains impurities or particles, etc.);

4. Users should understand the installation environment and installation method of the product:
Indoor or outdoor installation;
Ambient temperature;
Sealing grade requirements;
Vibration range of equipment;
Pressure seal mode: taper seal, end face seal, arc seal and spherical seal;
Whether the installation space meets the overall dimension of the product;

使用注意事项

PT100-T1温度传感器使用注意事项

安装使用请，核对产品标牌及合格证相关参数与使用工况是否相符合；热电阻/热电偶安装时，其插入深度不小于热电阻保护管外径的8倍～10倍；
尽可能使热电阻/热电偶受热部分增长；
热电阻/热电偶尽可能垂直安装，以防在高温下弯曲变形。
热电阻/热电偶使用中为了减小误差，应尽量使保护套管表面和被测介质温度接近；
产品安装时，受力部位为“过程连接六方扳手位”，扳手规格与六方相对应；
严禁被测系统的介质温度、压力量程、激励电压超过变送器的额定使用范围；
注意保护传感器/变送器电缆线或补偿导线；
尽量避免直接接近引起干扰的用户装置或电器；

Precautions for use of Pt100-T1 temperature sensor

For installation and use, please check whether the relevant parameters of the product label and certificate are consistent with the operating conditions;
When the thermal resistance / thermocouple is installed, its insertion depth shall not be less than 8 ~ 10 times of the outer diameter of the thermal resistance protection tube;
Increase the heating part of thermal resistance / thermocouple as much as possible;
The thermal resistance / thermocouple shall be installed vertically as far as possible to prevent bending and deformation at high temperature.
In order to reduce the error during the use of thermal resistance / thermocouple, the surface of protective sleeve shall be close to the temperature of measured medium as much as possible;
When installing the product, the stressed part is "process connection hexagonal wrench position", and the wrench specification corresponds to the hexagonal wrench position;
It is strictly prohibited that the medium temperature, pressure range and excitation voltage of the measured system exceed the rated service range of the transmitter;
Pay attention to protect the sensor / transmitter cable or compensation wire;
Try to avoid direct access to user devices or electrical appliances causing interference;

常见问题

我要提建议

姓名

联系电话

联系QQ

联系微信

电子邮箱

地址

建议内容