耐腐蚀数显压力变送器 PT500-704S
进口陶瓷压阻芯体;
外壳材料采用耐腐蚀进口聚四氟乙烯(铁氟龙)材料;
四位显示表头,小数位可调;
表头采样速率:10次/S;
4-20mA二线制电流输出;
专用铁氟龙防腐蚀电缆

常用关键字:
耐腐蚀数显压力变送器 耐腐蚀数显压力传感器
防腐蚀数显压力变送器 防腐蚀数显压力传感器
氯气数显压力变送器 氯气数显压力传感器
产品优势:

PT500-704S 耐腐蚀数显压力变送器


进口陶瓷压阻芯体;
外壳材料采用耐腐蚀进口聚四氟乙烯(铁氟龙)材料;
四位显示表头,小数位可调;
表头采样速率:10次/S;
4-20mA二线制电流输出;
专用铁氟龙防腐蚀电缆

常用关键字:
耐腐蚀数显压力变送器 耐腐蚀数显压力传感器
防腐蚀数显压力变送器 防腐蚀数显压力传感器
氯气数显压力变送器 氯气数显压力传感器


Model:PT500-704S
Imported ceramic piezoresistive core;
The shell material is made of Teflon imported corrosion resistant material;
Four digit display header, decimal places adjustable;
Sample rate of header: 10 times/S;
4-20mA two wire current output;
Special Teflon corrosion proof cable

Common keywords:
Corrosion resistant digital display pressure transmitter corrosion resistant digital display pressure sensor
Corrosion proof digital display pressure transmitter corrosion proof digital display pressure sensor
Chlorine digital display pressure transmitter chlorine digital display pressure sensor

芯       片:
进口陶瓷压阻芯体;
选进的贴片工艺,具有零点、满量程补偿、温度补偿;

信号处理及输出:
24位ADC采样处理芯片;
DSP数字信号调理算法;
多点性线温度校准;
电压电流过载保护;
四位显示表头,小数位可调;
表头采样速率:10次/S;
4-20mA二线制电流输出;

结       构:
外壳材料采用耐腐蚀进口聚四氟乙烯(铁氟龙)材料;
DIN43650赫斯曼标准电气连接器;
专用铁氟龙防腐蚀电缆

应      用:
PH值3-11的液位测量与监控;
化工、氯气等腐蚀性液体的液位测量与监控;

Chip:

Imported ceramic piezoresistive core;
The selected chip technology has zero point, full scale compensation and temperature compensation;
Signal processing and output:
24 bit ADC sampling and processing chip;
DSP digital signal conditioning algorithm;
Multipoint line temperature calibration;
Voltage and current overload protection;
Four digit display meter, adjustable decimal places;
Sampling rate of meter head: 10 times / S;
4-20mA two-wire current output;

Structure:
The shell is made of corrosion-resistant imported PTFE (Teflon);
Din43650 hesman standard electrical connector;
Special Teflon anticorrosion cable

Application:
Liquid level measurement and monitoring of pH value 3-11;
Chemical, chlorine and other corrosive liquid level measurement and monitoring;

应用领域:
  • 天然气管道

  • 送风系统

  • 供气系统

  • 供气管道

规格参数
PT500-704S 耐腐蚀数显压力变送器

测量介质:有腐蚀性的液体、气体
压力形式:表压(静压式)
量    程:0-50KPa~5MPa;
最小量程为50KPa,最大量程为5MPa;
综合精度:±0.25%FS;±0.5%FS;±1%FS
非 线 性:≤0.25%FS
重 复 性:≤0.15%FS
输出信号:
4~20mA二线制;
四位显示,显示范围:-1999 - 9999
压力表头采样速率:10次/S
供电电压:24VDC(9~30VDC)通用型
绝缘阻抗:≥1000 MΩ/100VDC
负载阻抗:电流输出: ≤800Ω;
介质/环境温度:-20~80℃
补偿温度:0~70℃
过载压力:150%FS
稳 定 性:≤±0.15%FS/年
振动影响:≤±0.15%FS/年(机械振动频率20Hz~1000Hz)
破坏压力:3倍量程(量程小于350MPa);2倍量程(量程大于400MPa)
电气连接:DIN43650赫斯曼标准电气连接器
防护等级:IP65
连接电缆:专用铁氟龙液位电缆
过程连接:M20X1.5,G1/2,M22X1.5,ZG1/2,1/2NPT等
连接材料:进口聚四氟乙烯(铁氟龙)






Measuring medium: corrosive liquid and gas
Pressure form: gauge pressure (static pressure type)
Range: 0-50kpa ~ 5MPa;
The minimum range is 50kPa and the maximum range is 5MPa;
Comprehensive accuracy: ± 0.25%FS; ± 0.5%FS; ± 1%FS
Nonlinear: ≤ 0.25% FS
Repeatability: ≤ 0.15% FS
Output signal:
4 ~ 20mA two wire system;
Four digit display, display range: - 1999 - 9999
Sampling rate of pressure gauge: 10 times / S
Power supply voltage: 24 VDC (9 ~ 30 VDC) universal type
Insulation impedance: ≥ 1000 m Ω/ 100VDC
Load impedance: current output: ≤ 800 Ω; Medium / ambient temperature: - 20 ~ 80 ℃
Compensation temperature: 0 ~ 70 ℃
Overload pressure: 150% FS
Stability: ≤ ± 0.15% FS / year
Vibration effect: ≤ ± 0.15% FS / year (mechanical vibration frequency 20Hz ~ 1000Hz)
Failure pressure: 3 times of measuring range (measuring range is less than 350Mpa); 2 times of measuring range (measuring range greater than 400MPa)
Electrical connection: din43650 hesman standard electrical connector
Protection grade: IP65
Connecting cable: special Teflon liquid level cable
Process connection: m20x1.5, G1 / 2, M22x1.5, ZG1 / 2, 1 / 2NPT, etc
Connection material: imported PTFE (Teflon)

订购注意事项
PT500-704S产品订购注意事项
1、产品量程选择:
为了使产品精度、寿命、稳定性等功能达到最佳效果,产品的量程选择参照以下公式计算:
量程 = 系统最大压力 X (1.2-1.5)倍;
产品的实际测量压力范围,应该在量程范围的15%-80%;

2、产品供电及输出:
供电范围的选择按产品的个输出规格确定:
常规4-20mA,直流12-30VDC供电;
显示表头,四位,小数位可调;


3、用户要了解产品的测量介质特性:
介质规格、介质温度、介质纯度(是否含有杂质或颗粒等);

4、用户要了解产品的安装环境及安装方式:
室内或室外安装;
环境温度;
要求的密封等级;
设备的振动范围;
安装方式:螺纹、法兰、特殊结构;
安装空间是否满足产品外形尺寸;


1. Product range selection:
In order to achieve the best effect of product accuracy, life, stability and other functions, the range selection of the product is calculated by referring to the following formula:
Range = x (1.2-1.5) times of the maximum system pressure;
The actual measuring pressure range of the product should be 15% - 80% of the range;

2. Product power supply and output:
The selection of power supply range is determined according to the output specifications of the product
Conventional 4-20mA, DC 12-30vdc power supply;
Display head, four digits, decimal adjustable;

3. The user should understand the measurement medium characteristics of the product:
Medium specification, medium temperature, medium purity (whether containing impurities or particles, etc.);

4. Users should understand the installation environment and installation method of the product:
Indoor or outdoor installation;
Ambient temperature;
Required sealing level;
Vibration range of equipment;
Installation method: thread, flange, special structure;
Whether the installation space meets the overall dimension of the product;
使用注意事项
PT500-704S耐腐蚀压力变送器产品使用注意事项
产品供电请对照产品合格证及使用说明,不同的输出方式,供电电压不同;
严禁使用硬物(如:螺丝刀、手指、铁钉等)去使得压芯体受压力测量输出;
电源和信号线按订购产品规格要求,正确接线;
产品安装及使用时,保护好电缆导气管,电缆的导气管严禁进水或堵塞;
严禁被测系统的介质温度、压力量程、激励电压超过变送器的额定使用范围;
注意保护变送器引出电缆,现场使用跨度过大时,建议使用金属管保护或架空;
测量水井,地下水、河流、水库等水位时,注意传感器的投入位置避开淤泥高度;
大量程水位产品,电缆线长度超过30米时,液位变器不可直接用电缆受拉力;
测量水流较急的水位时,液位变送器随加限位管进行安装,保证产品上不浮;
变送器的安装位置,为了减少信息干扰保证测量精度,尽可能的避开磁场变化大辐射大的设备,如:电机、潜水泵、高压电缆等;
野外安装变送器,加入避雷针等防护装置;

Precautions for PT500-704S pressure transmitter
Please refer to the product certificate and instructions for power supply. Different output modes and different power supply voltages are required;
It is strictly forbidden to use hard objects (such as: screwdrivers, fingers, nails, etc.) to make the pressure measurement output of the pressure core body;
The power supply and signal lines shall be correctly connected according to the product specifications;
When the product is installed and used, protect the cable air duct, which is strictly prohibited from water entering or blocking;
It is strictly prohibited that the medium temperature, pressure range and excitation voltage of the measured system exceed the rated range of the transmitter;
Pay attention to protect the outgoing cable of transmitter. When the span is too large, it is recommended to use metal tube for protection or overhead;
When measuring the water level of wells, groundwater, rivers and reservoirs, pay attention to the input position of sensors to avoid the height of sludge;
For a large range of water level products, when the cable length is more than 30 meters, the liquid level transformer can not be directly pulled by the cable;
When measuring the water level with rapid water flow, the liquid level transmitter is installed along with the limit pipe to ensure that the product does not float;
In order to reduce the information interference and ensure the measurement accuracy, the installation position of the transmitter should avoid the equipment with large magnetic field change and radiation as far as possible, such as motor, submersible pump, high-voltage cable, etc;
Field installation transmitter, add lightning rod and other protective devices;

常见问题
我要提建议
姓名
联系电话
联系QQ
联系微信
电子邮箱
地址
建议内容
佛山市普量电子有限公司

电话:0757-26619568 传真: 0757-26619508

24小时在线技术支持:13790092618

云平台:www.puliangiot.com

地址:佛山市顺德区容桂街道华口社区华天南一路2号杰森家电智造中心3栋202号

版权所有©佛山市普量电子有限公司
Baidu
map